Tips For Replacing a Window Handle
Switching the handle on your window is an easy project that can be completed from the convenience of your own home. Follow these tips for a smooth operation and great appearance.
Start by removing the screws to reveal the screws within the uPVC window handle. Then measure the spindle length to ensure that you receive the correct size replacement.
1. Measure the Spindle length
When replacing a window handle, it's important to determine the dimensions of the spindle correct. This is because it will affect how tight or loose the handle is, and whether it will lock correctly within the frame of the window. The spindle is the metal shaft that connects to the handle and to the lock within the window frame. The spindle is available in the standard 8mm industry cross-section or older versions of 9mm. Modern industry standards are 8mm, but it wasn't always the case. It is essential to check the measurements when purchasing a new handle.
The easiest way to measure the length of the spindle is to take off the handle you have already installed This can be accomplished by turning it to the open position, then unscrewing the two screws (which might be hidden behind plastic caps that will require removal) that hold the handle. After the handle is removed, measure the distance from the base to the point at which it ends. This will give you the measurement required to buy a replacement.
There are a variety of options when it comes time to choose a new window handle. From sleek chrome that can fit in with a modern style, to traditional bronze with a burnished finish that looks stunning in restored Georgian rooms, or even the more traditional Tudor cottages with mongoose tails curled. There are many options to choose from, but the most important is to select one that complements your home.
Espag handles are commonly installed to uPVC window frames and are always the exact same size with a 43mm center. Cockspur handles are available in a variety of sizes, ranging from 58mm up to 62mm. Cadenza window handles are a different size again since they have an angled blade that operates a multi-point locking mechanism inside the window.
Another factor when choosing the right window handle is knowing which hand you need to use, which is defined by what hand you use to open the door. Inline Espag handles can be used with right or left-handed windows. Cranked window handles are only used with windows that are open in one direction.
2. Take the handle off
A window handle that falls out can be frustrating, regardless of whether the handle has been damaged or worn out. But the good part is that replacing the uPVC window handle is a very easy task you can complete yourself. All you need are some basic tools and some time to complete the task.
You will need to first open the window and ensure that it is not locked. Then, take off the screw caps that hold the handle in place. Once these caps are removed, you can begin working on the removal of the handle itself.
The handle is connected to a spindle in the window frame. Based on the type it is held in place with a screw or pin. The most commonly used types of handles are inline Espagnolette handles and handles with cockspurs. Both of these kinds of handles are employed on casement windows, as well as aluminum windows. They can be locked by using keys to stop unauthorised opening of the window from outside, or you can lock them by turning the handle clockwise.
To remove upvc door handle , you will need a flat-bladed screwdriver. After the clip has been released, the handle should be able to slide off the spindle. Once the old handle is removed, you'll have to determine the length of the spindle and make sure that the new handle is compatible with this size.
Once you've determined the proper size of the handle, you can screw it into the correct position. It is important to make sure that the new handle is securely secured and that it is turning the correct way (clockwise for open or counterclockwise for closed). It is crucial to make sure that the handle hasn't been placed upside down.
Replace the cap screws. After you have completed this step, you are able to test the handle to be sure that it's working properly. It is also recommended to test the locking mechanism by moving the handle from the locked position, and then returning it to the locked position.
3. Remove the Screws
A uPVC handle is an important part of any house and is the first thing to show signs of wear or damage. It can be caused by natural causes or from regular use and sometimes even intentional damage caused by criminals who might want to open a closed window to gain access to your home. However, a simple replacement can easily solve the problem and prevent the issue from happening again.
uPVC handles may also be difficult to remove when the locking mechanisms are not functioning properly. It's usually possible to resolve the problem by replacing the multipoint locking mechanism instead of the whole handle. This could help you save money.
After you've removed the old handle, you'll need to remove the screws fixing it to the base. These screws are usually located on the inside of the handle's base. You may require a screwdriver for this and it's essential to not over tighten, as this could cause the handle to become loose.
Then you will need to locate the pins or screws that secure the handle. These are usually located on the inside of the base of the handle. You'll need a screwdriver to take them off. After they've been removed, you'll have to replace the caps on screws if you wish to do so and test the new handle to make sure it's functioning properly.
Install the handle by aligning the spindle to the cutout in the window mechanism. Then, screw it in. If you want to replace the screws make sure that the handle is in a slack position and any screws are securely secured. Once this is complete you're all done and you can enjoy your new window handle. We hope this will allow you to avoid the need for expensive window and door replacements in the future. If you'd like more assistance with this or any other aspect of your uPVC windows, don't hesitate to contact us.
4. Install the new handle
If you're replacing a damaged handle or simply making it more modern, the process is surprisingly easy and can be accomplished in a matter of a few steps. The first step is to determine the kind of handle, measure its spindle and identify the tools you will need to complete the task. Always prioritise safety when working with windows and tools. It is also essential to take your time and follow the steps to ensure that you have a functional handle that is safe to use.
The first step is to find the screws that hold your current window handle in place and remove them, while keeping an adequate grip on the handle itself to stop it from falling and causing injury. Once the screws are removed, you can place them in a safe location to be replaced later.
After you have removed the handle, you are now able installing your new handle. It is crucial that the handle is fitted perfectly to ensure it functions correctly and locks the window in position. Next, slide the square metal bar on the handle into the hole for the window mechanism.
After your new handle is in place, the final step is to replace the screw caps and check to see if it functions. If you're not happy with the outcome or if the window does not open and close as it should, the next step is to contact our experts who can assist.
The majority of homes in the UK have uPVC windows, and as they are, a lot of them will need to be replaced in the near future due to damage or wear. Anyone with some DIY experience can easily complete the task. It is crucial that the handle you use matches the size and style of your window. If you're not sure what kind of handle you'll need, feel free to reach out to our team, who can provide you with the options available.